Studio Notan LEARNING HUB
Launch Studio
Principle of design · Pattern

One Motif, Four Moves

Repeat one asymmetric motif by sliding, turning, mirroring and gliding it in the studio, print it through a hand-cut stencil, and see how each pattern repeats again across the fold.

One small right triangle, repeated two ways. Along the top it slides, and its pieces above the sheet slide too. Along the bottom it glides, flipping at every step like footprints, and its pieces below repeat the glide in mirror image.

the sheet’s front a flipped piece, showing the back the ground

For the studio

What you need to make it on screen.

  • A computer or tablet with a web browser, open to Studio Notan
  • A strip of paper about 4 by 18 inches, scissors and a pencil for the warm-up
  • Printed or projected images of the Alhambra tilework, a katagami stencil and Morris’s Strawberry Thief
  • Colored pencils for marking repeats on the printed images

For paper and paint

What you need to make it by hand.

  • Cardstock, 65 to 110 lb, for the stencil: stiff enough to lie flat and to be turned over (a manila file folder also works)
  • Three sheets of letter-size white cardstock: two cut lengthwise into four strips for printing, one for the ground of the cut version
  • Acrylic or tempera in one dark color: acrylic dries within minutes and will not smear once dry, and tempera washes out more easily for younger learners
  • A stencil brush, round and stiff with a flat top, or a small piece of kitchen or makeup sponge
  • Painter’s tape to hold the stencil in place
  • A ruler, a pencil and a white pencil
  • A sheet of black construction paper for the cut version
  • A craft knife and self-healing cutting mat for older learners; small pointed scissors for younger ones, with an adult to start each cut on its line with the knife
  • A paper plate for the paint, paper towels, a glue stick and newspaper to cover the table

In the guide

The chapters for the tools this activity uses.

Standards it meets

National Core Arts Standards, the visual arts anchor standards.

  • Cr2
    Organize and develop artistic ideas and work
  • Pr5
    Develop and refine artistic techniques and work for presentation
  • Cn11
    Relate artistic ideas and works with societal, cultural, and historical context to deepen understanding

It also explores

Other ideas this activity touches.

Learning outcomes

By the end, you can:

  • Name the four ways a motif can repeat on a flat surface and point to each one in a historical pattern.
  • Set exact Transform and Copies values to repeat one motif as a row, a rosette, a mirror border and a glide.
  • Predict how a repeated row of cuts will repeat again, mirrored and reversed in value, when it folds over an edge.
  • Cut a stencil and print one motif as a slide, a mirror border and a glide, then compare the prints with cut holes and pieces.

The idea of pattern

Pattern is the repetition of a motif, such as a shape, line or color, in a planned and regular arrangement across a surface. A motif can repeat by sliding, turning, mirroring, or mirroring and sliding at once.

In a notan: A notan is patterned from the first cut: every shape repeats once, as its mirrored piece, in the opposite value. Repeat the cut and the pattern doubles: a row of holes along an edge makes a row of pieces beyond it, and a border in the sheet becomes one on the ground. The four ways a motif can repeat across a flat surface, sliding (translation), turning (rotation), mirroring (reflection) and mirroring while sliding (glide reflection), are all in the studio’s Transform and Copies. The fold is one more reflection laid over whatever you build: any pattern that folds out across an edge is repeated again, mirrored and reversed in value, on the other side.

A pattern is a motif and a rule for repeating it. On a flat surface there are only four basic moves. You can slide the motif along, turn it about a point or mirror it across a line. Or you can mirror it and slide it at once, the glide that turns a left footprint into the next right one.

Every wallpaper, tiled floor and printed fabric is built from these four. In 1891 the crystallographer Evgraf Fedorov proved that they combine in exactly seventeen distinct ways to repeat a pattern in two directions across a plane.

Notan adds a twist. The fold is a reflection too, so any pattern you cut near an edge repeats once more beyond it, mirrored and in the opposite value. In this activity you build each of the four moves from one asymmetric motif, predict how each survives the fold, and then combine them into a single design. Last, you cut the motif as a stencil, print it by hand, and set the prints beside the same motif cut and folded.

Art history

Pattern-makers have explored these moves for centuries, and every work below was made by cutting: cut tile, cut paper, carved printing blocks and a woodcut. Each makes one or more of the four moves easy to see, and one of them already behaves like a notan, with dark and light shapes that are each other’s spaces.

  • Nasrid craftsmen Tile mosaic dado, Hall of the Ambassadors, Comares Palace, c. 1333–54 Alhambra, Granada

    The lower walls of this throne room are covered in alicatado, glazed tile cut into small pieces and fitted into interlacing star patterns. Look for the turns around each star and the mirror lines running through it. M. C. Escher spent days copying the Alhambra’s tilings in 1936, and they set the direction of his later work.

  • Anonymous Japanese artisan Textile Stencil (katagami) with Chrysanthemum Design, 1800s–early 1900s Harvard Art Museums, Cambridge, Massachusetts

    Katagami are paper stencils, cut from mulberry paper made strong and water-resistant with persimmon tannin, through which a resist paste was spread onto cloth before dyeing. The stencil was laid down again and again along a bolt of fabric, so one cut sheet produced an unbroken repeat: a slide, made by hand.

  • William Morris Strawberry Thief, 1883 Victoria and Albert Museum, London

    Morris based this furnishing fabric on the thrushes that stole strawberries from his garden, and it was printed from carved blocks, one impression at a time. It is a turnover, or mirror, repeat: pairs of birds face each other across a vertical axis, and the whole unit then slides to repeat across the cloth. Two of the four moves, working together.

  • M. C. Escher Day and Night, 1938

    A checkerboard of fields rises into interlocking birds: black birds flying one way into daylight and white birds flying the other way into night, over a landscape mirrored from left to right. It is a tessellation and a notan at once, since each flock is shaped by the spaces between the other.

Design today

Pattern designers think in repeats. A textile or wallpaper design is drawn as one tile that must join itself seamlessly on every side. The tile is then set out as a straight repeat, a half-drop, in which each column is shifted down by half a tile, or a mirror repeat like Morris’s. Maija Isola’s Unikko poppy print for Marimekko, from 1964, is still in production, and its huge flowers show how much the scale of a motif changes the feel of a repeat.

Brands use pattern as identity. The Louis Vuitton Monogram canvas, launched by Georges Vuitton in 1896, repeats initials, flowers and quatrefoils so that the pattern itself becomes the signature. It was designed partly to make the luggage harder to counterfeit.

One habit of pattern designers carries over: before you commit to a pattern, look at its seams. In a wallpaper the seam is where one tile meets the next; in a notan it is the edge of the sheet, where every pattern meets its own reflection.

Start with a warm-up

Fold a paper strip back and forth like a fan into six or eight panels. Draw a simple motif on the top panel that touches both folded sides, cut it out through every layer, and open the strip. Each figure is a mirror image of its neighbor: folding has made a mirror repeat, the move Morris used in Strawberry Thief. Notice that each fold does what the edge of a notan sheet does.

In the studio

Make it in Studio Notan, where every cut can be moved, refolded and undone.

  1. Design an asymmetric motif
    In the studio, use the Pen to draw a small motif about half an inch across near the top edge, and fold it up. Try a leaf with a hooked tip, a flag, or a letter such as F or R. It must look different when turned or mirrored, or the moves you are about to make will be invisible.
  2. Slide
    Select the motif with Move, and in ‘Transform’ on the Controls tab set the Move ‘Horizontal’ to a little more than the motif’s width and ‘Copies’ to 5. Before you press ‘Apply’, turn ‘Preview’ off and sketch where you expect the new pieces to land. Turn it on again to check, and apply. The pieces above the sheet form a second row, each a mirror of its hole, so one move in the sheet has made two patterns (see Copies).
  3. Mirror
    Draw a second motif near the bottom edge, fold it down, and select it with Move. Turn on ‘Reflect Y’, set the Move ‘Horizontal’ to about one motif’s width, set ‘Copies’ to 1 and apply. The copy lands beside the original as its mirror image, a turnover pair like Morris’s birds. Keep ‘Copies’ at 1 for the pair itself, because with a reflection and a move, every second copy lands back on the original.
  4. Slide the pair into a border
    The copy joins the selection, so now set a plain horizontal move of two motif widths with ‘Copies’ at 3 to slide the pair into a mirror border.
  5. Glide
    Draw a third motif near the left edge, fold it left, and select it with Move. Turn on ‘Reflect Y’ again, but this time set a Move ‘Vertical’ a little more than the motif’s height, with ‘Copies’ at 5. Because the reflection is across the line you are moving along, the copies alternate like footprints walking down the edge: a glide reflection.
  6. Turn
    Draw a fourth motif in the middle of the sheet, fold it right, and select it with Move. In the reference-point grid of nine squares, click one corner, then set the ‘Angle’ to 45 and ‘Copies’ to 7. The eight motifs fan around that corner into a rosette, a rotation. Beyond the right edge, the rosette’s pieces spin the other way, because a mirror reverses the direction of every turn.
  7. Read the fold
    Compare each pattern with its pieces. A slide stays a slide, a mirror border stays a mirror border, and a glide stays a glide, but each is reversed in value and mirrored across its edge. Check the seams: where does each pattern meet its reflection, and does the join look planned or accidental?
  8. Loosen one pattern
    Undo would take back everything since the top row, so instead click one of its five copies, Shift-click the other four, and press Delete. Then select the first motif, turn on ‘Random’ in ‘Transform’, enter the same slide again, and apply it. Each step now takes a random share of the move, so the regular row becomes an irregular one, more like leaves on a path than tiles on a floor. Decide whether your design wants the exact version or the loose one.

With paper and paint

Print through the hole. Copies repeats a motif perfectly and at once, but by hand every repeat is its own act: lay the stencil down, dab, lift, move it one step, and again. That rhythm is how the patterns in this lesson were made, from a katagami stencil laid again and again along a bolt of cloth to the carved blocks of Strawberry Thief. Paint shows the hand in every print, a little heavier here and lighter there, so you see how much variation a pattern can hold and still read as regular. A cut stencil gives you both halves of a notan at once, because the hole prints the motif dark on light and the piece, used as a mask, prints it light on dark.

  1. Cut the stencil
    Cut a square of cardstock as tall as your strips, about 4 inches, and draw your studio motif on it: the hooked leaf, the flag or the F. Make it about an inch and a half tall, centered from side to side and a little above the middle, and keep it one solid shape with no enclosed hole. The loop inside an R would fall out of a stencil unless you left a narrow bridge to hold it. Cut it out on the mat and keep both halves, the square with its hole as the stencil and the cut-out motif as the piece.
  2. Mark the strips and load the brush
    Along both long edges of each strip, mark five points two inches apart, starting an inch and a half from one end. Draw a short tick at the middle of the stencil’s top edge. Load the stencil brush with a little paint and dab most of it off on a paper towel until the brush is nearly dry.
  3. Print a slide
    Set the stencil flush with the strip, its tick on the first mark, and hold it flat. Pounce straight down through the hole, since brushing sideways pushes paint under the edge, and lift the stencil straight up. Print the first, third and fifth marks, then fill in the second and fourth once those prints are dry, so the stencil never lies on wet paint.
  4. Print a mirror border
    On a second strip, print the first, third and fifth marks with the stencil face up. When the prints and the stencil are dry, turn the stencil over like the page of a book, so the tick stays at the top. Print the second and fourth. Each print is now the mirror image of its neighbors: a turnover repeat like the facing birds in Strawberry Thief, sliding along as a border.
  5. Print a glide
    On a third strip, print the same way, but turn the stencil over from top to bottom for the in-between prints, like a calendar page. Line its tick up with the marks along the lower edge. Because the motif sits a little above the middle of the stencil, the turned prints fall below it, and the strip walks like a row of footprints.
  6. Print around the piece
    On the last strip, lay the cut-out piece face down, so it is mirrored like a folded notan piece. Hold it in place with a small loop of tape underneath, pounce paint over its edges onto the paper around it, and lift it. The motif stays white inside a halo of paint. Repeat at each mark: where the hole printed the motif dark on light, the piece prints it light on dark, so one cut has made both values, as in a notan.
  7. Cut the same row
    Trim black construction paper to about 11 by 5 inches and mark the same five points along one long edge. Set the stencil’s top edge along that edge, line its tick up with each mark, and trace inside the hole with the white pencil, so every cut matches the prints. Cut out the five motifs and glue the sheet along the bottom of a sheet of white cardstock turned sideways. Turn each piece over across the top edge, like a calendar page, and glue it as far above the edge as its hole sits below it.
  8. Compare the repeats
    Pin the printed strips beside the cut row and step back. A printed slide shows the motif once at each step, but one row of cuts makes two rows of pattern: holes, and mirrored pieces in the opposite value. The prints carry the stippled texture of the brush and small differences from one print to the next, while the cuts are flat and exact. Which reads more strongly as a pattern from across the room, and where does each repeat meet its seam?

Take care: Cut on a self-healing mat with the blade moving away from your body and your other hand behind it, and let an adult handle the knife for young learners. Use paints labeled non-toxic (look for the ACMI AP seal), cover the table, and let prints dry before the stencil touches them. Wash the stencil brush in soapy water straight away, since acrylic left to dry ruins the bristles.

Your challenge

One Motif, Every Edge. Design a pattern notan from a single motif that uses at least three of the four moves and carries a repeat across at least two edges of the sheet. Then swap designs with a partner, without notes, and have your partner name every move in your design and point to where it happens. Your partner also judges whether each repeat holds where it meets its reflection at the edge, and your design scores a point for each move the partner names correctly. Work in the studio, or in paper: trace every cut through one stencil and fold each piece out over the edge, as the studio would.

The rules

Your notan keeps to all of these.

  • Every cut must be the one motif or a copy of it, slid, turned, mirrored, glided or scaled.
  • On screen, every repeat is made with Transform and Copies; on paper, every cut is traced through one stencil at measured steps. Nothing is placed by eye.
  • At least twelve cuts in total.
  • The pattern must fold out over at least two edges of the sheet.

Answer it in the studio or with paper and paint.

Take it further

Try Escher’s method for a shape that tiles: draw a square with Rectangle, then with Points push a bump out of its left side and pull the same curve into its right. Do the same for the top and bottom, using the arrow keys, which nudge anchors by exact steps, so that what leaves one side arrives exactly at the other. With Copies, step it exactly one tile width and the tiles lock together, with gaps only where the curves differ; step it two widths, and only every second tile is cut. The paper left standing between those holes then takes their own outline on each side, and figure and ground begin to trade places, the effect Escher pursued in Day and Night.

Questions to reflect on

Answer these when you finish, aloud or in writing.

  • Which of the four moves was easiest to see, on screen or in print, and which was hardest to spot?
  • How did the fold change each pattern, and why did the rosette’s pieces spin the other way?
  • Where does your pattern meet its own reflection at the edge, and does the join look planned?
  • Which historical pattern uses a move you did not expect, and where?

What to look for

Check the finished notan for each of these.

  • The motif is asymmetric, so turns and mirrors are visible on screen and in print.
  • Each of the four moves is built with Transform and Copies using exact settings, with rows parallel to their edges.
  • The stenciled prints have clean edges with no paint crept under the stencil, sit on even steps, and form a true mirror border and a true glide.
  • You predict, before the preview, where a row’s pieces will land beyond the edge.
  • You name the moves in a partner’s design correctly.