I can
By the end, you can do these things.
- point out the figure and the ground in an artwork and say what makes the figure stand out
- balance one big cut with several smaller ones so my notan does not lean
- cut a small shape out of a flipped piece and put it back as an island
- add a third value to my design and explain what it changed
- explain how history and politics can shape an artwork that reuses an older form
- critique a classmate’s notan in four steps: describe, analyze, interpret, judge
Words to know
You will use these words.
- Figure
- The shape you see as the thing.
- Ground
- Everything around and behind the figure.
- Asymmetrical balance
- Balance from parts that are different but pull equally.
- Nested cut
- A small shape cut out of a piece you already flipped.
- Value
- How light or dark something is.
- Thumbnail
- A small, quick plan drawing.
- Critique
- A careful talk or piece of writing about an artwork, in steps.
What to do
Follow these steps.
- Look at Rubin’s vase and a Japanese family crest. Decide which part is the figure, and write why: size, enclosure, value or position.
- Draw six thumbnail plans, each with one big cut on one edge answered by at least three smaller cuts on other edges. Star your best two.
- In the studio, set the width and the height both to 5 inches in the Paper section of the Controls tab, so your sheet is square. Draw your big cut and flip it over its edge with an arrow.
- Add the smaller cuts, then step back and squint. Does it lean?
- Make a nested cut: draw a small shape inside the hole your big piece left, then press ‘Put back’ for an island. Try a second one and send it to another side with an arrow.
- Export your two-value design, then make the Back white and the Ground gray on the Color tab and export again. Which areas became figure?
- In paper, draw your cuts on the black face with a white pencil, cut them, and flip each piece over its edge. Try your pieces on white, black and gray grounds before you glue.
- Critique a classmate’s notan in four steps: describe, analyze, interpret, judge.
Your challenge
Make a notan in which a viewer cannot decide which part is figure and which is ground, just as in Rubin’s vase.
Check your work
Look at your work. Can you say yes to each one?
- My big cut is balanced by at least three smaller cuts on other edges.
- My notan does not lean when I squint at it from across the room.
- I made one nested cut in the studio and one in paper.
- I have a two-value and a three-value version, and I can say what changed.
- Every paper piece lines up with the edge of its hole.
- My critique has all four steps, with a reason for my judgment.
Think about it
Talk or write about these.
- Which part of your notan did your eye read as the figure first? Was that your plan?
- What balanced your big cut: number, size, value or distance from the center?
- How did the third value change your design?
- Why might the makers of kamon, or Kara Walker, choose flat shapes in just two values?