Studio Notan LEARNING HUB
Launch Studio
Teacher version · Middle School · Grades 6 to 8

Figure or Ground? Asymmetry and Nested Cuts

Students test figure against ground, balance one large cut with smaller ones, cut a shape from a flipped piece, add a third value, and critique in Feldman’s four steps.

Unit overview

Middle schoolers are ready to look at how seeing works. Shown a picture that flips between two readings, students in grades 6 to 8 want to know why, and notan turns that question into making. Every cut in a notan is a hole in the sheet and a mirrored piece beyond its edge, so figure and ground trade places with each cut. This unit starts from Edgar Rubin’s vase and faces (1915) and from Japanese family crests, then asks students to build a design that balances without matching: one large cut answered by several small ones.

Over five sessions students plan in thumbnails and build an asymmetrical notan in the studio. They add a nested cut (a small shape cut from a piece already flipped) and move from two values to three, as Arthur Wesley Dow’s students did. They then cut the design in painted paper and close with a written critique in Edmund Burke Feldman’s four steps. The unit assumes students have made a basic notan; if they have not, begin with Balancing the Flip.

Learning outcomes

By the end of the unit, learners can do each of these. The middle column is what you will see or hear that shows it; the last column links to the standards it meets, quoted in full at the end of the page.

#By the end, learners canWhat you will seeStandards
1 Distinguish figure from ground in Rubin’s vase, a Japanese family crest and a classmate’s notan by naming the cue that decides each (size, enclosure, value or position). Describe both readings of a reversible image. On the session 1 exit ticket the student labels figure and ground in all three images and writes one cue for each. Aloud, the student describes both readings of Rubin’s image, the vase and the two faces. §117.202(c)(1)(A)
§117.202(c)(4)(A)
2 Plan an asymmetrical notan in six thumbnail sketches, each with one dominant cut answered by smaller cuts on other edges, and select the two strongest with a written reason. The thumbnail sheet holds six different 2-inch plans with the large cut on at least three different edges, two of them starred. Under each star, a sentence names what balances the large cut: number, size, value or distance. §117.202(c)(2)(B)
§117.203(b)(1)(C)
3 Construct an asymmetrical notan on a square sheet in the studio in which one large cut on one edge is balanced by at least three smaller cuts on the other edges. The exported PNG shows one cut clearly larger than the rest and at least three smaller cuts spread over at least two other edges, with no mirrored pairs. Seen from across the room, classmates agree it does not lean, and the student names what balances it. §117.202(c)(1)(C)
§117.204(b)(1)(C)
4 Make a nested cut, a smaller shape cut from a piece already flipped, in the studio and in paper. Point out the island and the gap it leaves as figure and ground trading places. The studio design and the paper notan each contain at least one nested cut. Asked to show it, the student points to the small island inside the hole and the matching gap in the flipped piece, and says which one reads as figure. §117.203(b)(2)(C)
§117.202(c)(2)(C)
5 Convert a two-value notan into a three-value one, in the studio by changing the Back and Ground colors and in paper by testing loose pieces on white, black and gray grounds. Then state what the third value changed. The student hands in two exports of one design, black and white and then with a gray ground, and glues the paper version to the ground chosen in the dry-fit. The student also writes one sentence naming which areas the gray turned into figure or pushed back into ground. §117.203(b)(1)(B)
§117.204(b)(1)(B)
6 Explain how history and politics shape an artwork that reuses an older form. Kara Walker, for example, turns the silhouette portrait of the 1700s and 1800s toward the history of slavery and racism in the United States. On the session 5 exit ticket the student names the older form, when it was popular and the history the new work confronts. The student then writes one sentence on how a flat black shape with no face carries that meaning for a viewer. §117.202(c)(3)(A)
§117.202(c)(1)(D)
§117.203(b)(3)(A)
7 Critique a classmate’s notan in writing with Feldman’s four steps, describe, analyze, interpret and judge, supporting the judgment with at least one named element or principle. The written critique has four labeled parts with at least one full sentence each. It uses at least three unit words correctly, such as figure, ground, asymmetrical balance, value or nested cut. Its judgment gives a reason found in the work, not only “I like it.” §117.202(c)(4)(A)
§117.202(c)(4)(B)

Before you teach

Check these before the first session.

What learners should already know

Learners come to this unit with these.

  • Make a basic notan: cut a shape from the edge of a square and flip it over that edge so the piece mirrors the hole.
  • Name the elements of art and the principles of design, including value, shape, space and balance.
  • Cut along a drawn line with scissors, and open and save a file on the school computers.

Words to teach

Teach these words, with these meanings, during the unit.

Figure
The shape the eye reads as the thing, standing in front.
Ground
The area around and behind the figure. In a notan, the holes and the space around the sheet show the ground.
Figure-ground reversal
A design in which figure and ground can swap places, as in Rubin’s drawing that reads as a vase or as two faces.
Asymmetrical balance
Balance made from unlike parts that pull equally, such as one large shape answered by several small ones.
Visual weight
How strongly a shape pulls the eye. Size, darkness and distance from the center all add weight.
Nested cut
A smaller shape cut from a piece that has already been flipped, which leaves an island in the hole and a gap in the piece.
Value
How light or dark a color is, from white through the grays to black.
Thumbnail sketch
A small, quick drawing that tests a plan before the real work begins.
Kamon
A Japanese family crest: a flat design, often inside a circle, that has marked a family for centuries on clothing, banners, lanterns and the roof tiles of buildings. Crests are still worn on the most formal kimono, often as a white crest on black.
Critique
A careful discussion of an artwork in steps. Feldman’s method has four: describe, analyze, interpret, judge.

Materials to gather

Have these ready before the first session.

  • Computers or tablets with Studio Notan open, one per student or pair, and a projector for demonstrations
  • Images to project or print: Edgar Rubin’s vase and faces (1915), two or three Japanese family crests, Hokusai’s Under the Wave off Kanagawa and a page of Arthur Wesley Dow’s Composition. If you choose to show one, an image by Kara Walker that you have previewed
  • A thumbnail sheet for each student (letter paper with six 2-inch squares), pencils and black chisel-tip markers
  • The Level 2 worksheet on nested cuts and asymmetry, one per student
  • 5-inch squares of white 65 lb cardstock, one per student plus spares
  • Washable black tempera with the AP seal, 1-inch flat brushes, paper plates, water cups, paper towels and newspaper
  • Construction paper grounds, 12 by 18 inches, in white, black and middle gray: one of each per table for the dry-fit, and one per student in the color chosen
  • Scissors for every student, including adaptive loop or spring-loaded scissors
  • Craft knives with fresh blades, self-healing cutting mats and metal rulers, for students who have watched the demonstration, and a sharps container for used blades
  • White colored pencils, which show on black paint
  • Glue sticks and a stack of heavy books for pressing
  • A critique sheet with four headings (Describe, Analyze, Interpret, Judge) and printed sentence stems

Read first in the guide

These chapters explain the studio tools the unit uses.

Hub activities to draw on

These activities cover the same ideas, with steps and examples you can borrow.

Printable worksheets

Print these for the paper sessions.

A video to show

Preview it before class. YouTube may play an ad first and suggests other videos when one ends.

Matisse Paper Cut-Outs: Positive and Negative Space (opens in a new tab)Glacier Bear Art Room, 2020, 9 minutes
An art teacher’s recorded lesson, first made for secondary students. It opens with Henri Matisse, who turned to cut paper when illness kept him in a chair or in bed, and called it painting with scissors (0:00 to 1:13). From 4:27 to 5:53 several shapes come from one rectangle, and a leaf is cut out, the rectangle glued down, and the leaf then cut into parts glued one at a time. At 6:10 a second sheet trades positive and negative from one colored rectangle to the next, the starting point for the color idea under Going further.

Unit plan

Five 50-minute sessions, taught in this order.

Session 1, Figure, ground and thumbnails

50 minutes · Paper and paint

  1. Hook, 8 minutes
    Project Edgar Rubin’s drawing of a vase that is also two faces in profile, from the Danish psychologist’s 1915 study of seeing, and ask, “What do you see?” Then ask, “Now what else?” and let students call out both. Ask whether anyone can hold both at once, then explain that the shape you see as the thing is the figure and everything around it is the ground. A shared edge, Rubin noticed, seems to belong to only one side at a time.
  2. Crests, 10 minutes
    Show two or three Japanese family crests, kamon, including the sixteen-petal chrysanthemum of the imperial family and the three aoi leaves in a circle of the Tokugawa family. The Tokugawa shoguns ruled Japan in the Edo period (1603 to 1868). Students who met kamon in earlier grades now look at them for figure and ground. Pairs decide which part is figure, which is ground and why, while you chart their cues on the board (size, enclosure, value, position).
  3. Balance without matching, 7 minutes
    Project Hokusai’s Under the Wave off Kanagawa (about 1830 to 1832), a woodblock print from his series Thirty-six Views of Mount Fuji. A huge wave fills the left, a small Mount Fuji sits low, just right of center, and open sky fills the upper right. Ask, “Nothing matches, so why does it not tip over?” and let students who met this print in earlier grades name it: asymmetrical balance, unlike parts with equal pull. Then push further: what gives each part its visual weight, its size, its darkness or its distance from the center?
  4. Thumbnails, 20 minutes
    Hand out the thumbnail sheet, and have students plan a notan in each 2-inch square. Each plan has one large cut touching one edge, with its mirrored piece outside that edge, answered by at least three smaller cuts on other edges. Students shade what will be dark, the sheet and the pieces, with the marker. Say, “No two alike: put the big cut on a different edge each time,” then circulate and ask, “Which way does this one lean?”
  5. Choose and exit, 5 minutes
    Partners trade sheets, squint and star the two plans that hold still best. Under each star, the maker writes “The large cut is balanced by…” and finishes the sentence. For the exit ticket, students label figure and ground in Rubin’s drawing, one crest and a partner’s thumbnail, with a cue for each.

Session 2, Asymmetry and the nested cut

50 minutes · In the studio

  1. Set up, 5 minutes
    Students open the studio, where a new design starts on a sheet 4 by 5.5 inches. In the Paper section of the Controls tab, they set the width and the height both to 5 inches, a square like their thumbnails. Leave the colors as they start: front and back black, ground white.
  2. The big cut, 10 minutes
    Demonstrate on the projector: choose Draw and draw the large cut from a starred thumbnail in one stroke, touching or crossing the edge it will fold over. When the ‘Flip direction’ chooser opens, press the arrow for that edge. Then show that Undo, pressed straight after a flip, reopens the chooser with the shape waiting, so a student can try another edge without redrawing. Read Flipping beforehand if the chooser is new to you.
  3. Answer it, 15 minutes
    Students add at least three smaller cuts on the other edges with any drawing tool (Rectangle, Ellipse, Triangle, Hexagon, Pen or Draw), flipping each over the edge it should cross. They can slide or resize a cut with Move while its hole and piece follow. Every few cuts, everyone stands, steps back and squints: “Does it lean, and which way?”
  4. The nested cut, 12 minutes
    Demonstrate: choose Ellipse and draw a small oval inside the hole the large piece left, where the paper belongs to that flipped piece. Press ‘Put back’ in the center of the chooser, and a small black island returns to the sheet while a matching white gap opens in the flipped piece. Say, “The island is figure inside ground inside figure,” and have each student add one nested cut with ‘Put back’. Anyone who finishes early can add a second and press an arrow instead, which cuts the shape out of the piece and sends it to that side of the sheet.
  5. Save, 8 minutes
    From the File menu, students export Artwork as a PNG and choose ‘Save project’. On a sticky note they write which edge carries the most weight and what balances it, and stick it to the screen for your walk-through.

Session 3, Two values, then a third

50 minutes · Studio, then paper and paint

  1. Dow, 8 minutes
    Show a page of Arthur Wesley Dow’s Composition (1899), the book that brought the Japanese word notan, dark-light, into American art teaching. Say, “Today we do what Dow’s students did.” Dow learned from Japanese ink painting and woodblock prints and arranged his exercises in a progressive order: two values first, then three, then more. The hub activity Two Values, Then Three takes this idea further with a photo.
  2. Two values, 7 minutes
    Students open their design (the browser keeps it; on shared computers use ‘Open project…’ in the File menu), which has two values: black sheet and pieces on a white ground. Ask each student to name the figure in a word, then export this version as it is.
  3. Make something vanish, 8 minutes
    On the Color tab (read Back first if the color cards are new to you), type FFFFFF into the Back card’s hex field. Every flipped piece turns white and disappears into the white ground, leaving only the sheet and its holes. Then type 000000 into the Ground card, so the holes disappear and the white pieces float on black. Ask, “Which version has the clearer figure, and what did you lose?”
  4. Add a third value, 10 minutes
    Keep the back white and type a middle gray such as 808080 into the Ground card, for three values: black sheet, white pieces, gray holes and ground. Students export again, line up their exports and tell a partner which areas the gray turned into figure and which it pushed back.
  5. Paint for next time, 12 minutes
    Cover the tables, and have each student paint one face of a 5-inch square of white cardstock with black tempera, edge to edge. Students write their name in pencil on the white back. Lay the squares flat to dry, and wash brushes and wipe tables before the bell.
  6. Exit ticket, 5 minutes
    Each student finishes one sentence: “The third value changed my notan by…”

Session 4, Cut paper on three grounds

50 minutes · Paper and paint

  1. Tools, 8 minutes
    Scissors are the default and always allowed. For students who want a craft knife, demonstrate first: a self-healing cutting mat under the work, the blade moving away from the body, the other hand behind the metal ruler. Show the blade retracted or capped whenever it is put down, then count knives out only to students who watched.
  2. Draw the cuts, 10 minutes
    With the studio export on screen or printed, students draw each cut on the black face with a white colored pencil, where it sits in the studio design. They number each shape. Warn them: draw on the black face, not the white back, or every shape will come out mirrored.
  3. Cut and flip, 14 minutes
    Cut each shape in from its edge, keep every piece, and turn each piece over its edge, white side up, to lay it in its mirrored place beside the sheet. For the nested cut, cut a small shape from inside one flipped piece (scissors users may cut it in from the piece’s straight edge). Turn it back over the sheet’s edge, black side up, and set it in the hole where it came from. This is the paper version of ‘Put back’.
  4. Two values, then three, 10 minutes
    Before any glue, lay the sheet and its loose pieces on the table’s white ground, then on the black, then on the gray. On white the pieces vanish, on black the holes vanish, and on gray all three values show. Each student chooses a ground and tells a partner why, using the words figure and ground.
  5. Glue and clean up, 8 minutes
    Glue the sheet down first, then each piece, its straight edge lined up with the edge of its hole, and press under books. Count knives back in, put any used blades in the sharps container, and wipe the tables.

Session 5, Silhouettes and a written critique

50 minutes · Looking and talking

  1. Before class
    Many of Kara Walker’s scenes are graphic. They show violence, including sexual violence, and use the racist caricatures of the slavery era on purpose, to expose them. Preview any image and choose one suited to your students, or plan to describe her method without showing work.
  2. Gallery walk, 8 minutes
    Lay each paper notan beside its studio export and review gallery manners: look without touching, and speak about the work, not the maker. Students walk the room and note one design that makes them look twice.
  3. Model the method, 10 minutes
    Teach the four steps of the American art educator Edmund Burke Feldman. Describe what is there, analyze how it is organized, interpret what it means or makes you feel, and judge whether it succeeds and why. Model all four aloud on Hokusai’s wave from session 1.
  4. The silhouette, 12 minutes
    Explain that silhouette portraits, often cut from black paper, were a cheap and popular likeness in the 1700s and 1800s. Since the 1990s the American artist Kara Walker has cut black paper figures at the scale of whole walls and rooms, confronting the history of slavery and racism in the United States. Show the image you chose or describe her method, then ask, “Why might an artist tell this history with flat black shapes that have no faces?” Draw out answers about figure, ground and what the viewer must supply.
  5. Written critique, 15 minutes
    Each student draws a classmate’s name and writes a critique of that notan in the four steps, at least one full sentence per step and at least three unit words. Post the stems: “I see…”, “The largest dark shape is…”, “I think the artist wanted…”, “It works because…”.
  6. Close, 5 minutes
    Three volunteers read a judgment aloud and the maker answers in one sentence. For the exit ticket, students name the older form Walker reuses, when it was popular and the history her work confronts. They add one sentence on how a flat black shape with no face carries that meaning.

Support and extension

Ways to adjust the unit so every learner can reach it, and go further.

Extra support

For emergent bilingual students, students with disabilities, and anyone who needs more time.

  • For emergent bilingual students, post the unit words with a small picture beside each (figure, ground, balance, value, nested cut). Let partners plan in their home language, and provide the critique sentence stems in English and, where you can, in the home language.
  • For students with disabilities, offer adaptive loop or spring-loaded scissors, 7-inch squares with the cut lines drawn in advance, and extra time for cutting. The studio’s flip chooser works from the keyboard (an arrow key chooses an edge, Tab moves between arrows, Enter confirms), and Interface size on the Controls tab enlarges panels and buttons.
  • For students who find planning hard, give a starter thumbnail with the large cut already drawn and ask only for the answering cuts. Allow the critique to be spoken and recorded instead of written.
  • For students who find small pieces hard to keep in place, have them choose a ground from their studio exports and glue the sheet to it first. Then they cut any detail into a flipped piece a part at a time, gluing each part as it comes free, as the Matisse video shows at 5:33.

Going further

For learners ready for more.

  • Trace a figure-ground photograph you took yourself, such as a tree against the sky: choose ‘Trace a photo…’ in the File menu, set the Threshold, then press Invert to swap which side becomes the front. Which version makes the sky the figure?
  • Design a crest for yourself, a club or a team in the spirit of kamon: one motif inside a circle, with a nested cut. Make it your own rather than copying a real family’s crest.
  • Watch part of Lotte Reiniger’s The Adventures of Prince Achmed (1926), the oldest surviving animated feature film, made with jointed black silhouettes cut by hand. Then cut a silhouette figure whose pose reads from its outline alone.
  • Make a color version after the Matisse video: glue four rectangles of colored construction paper in a row on a white sheet, and flip a cut out over the top edge of each. On a second sheet, let positive and negative trade places from one rectangle to the next, then turn both on their side and choose the stronger.

Common misconceptions

What learners often get wrong, and how you can respond.

The figure is always the dark shape.
Show a white crest on a black kimono, then swap two colors in the studio by dragging one swatch onto another on the Color tab. The same shapes change roles. Enclosure, size and position decide the figure as often as value does.
A balanced design has to match on both sides.
Return to Hokusai’s wave: a huge mass on one side, a small mountain and open sky on the other. Lay a ruler across a pencil: a stack of three coins near the middle on one side is balanced by a single coin far out on the other. Distance from the center adds weight, in pictures as on a seesaw.
A nested cut is any small cut.
A nested cut is taken from a piece that has already been flipped. Ask the student to find its two traces: the island in the hole and the gap in the piece. If there is no gap in a flipped piece, it is an ordinary cut.
Adding a gray always improves a design.
Dow wrote that a gray midway between black and white changes how the two work together; that change can clarify a design or muddy it. Compare the two-value and three-value exports from across the room and let the class vote on which reads more clearly.

Assessing the work

Check understanding while learners work, then score the finished work with the rubric.

Checks along the way

Quick checks you can make during the sessions.

  • Session 1 exit ticket: figure and ground labeled in three images, each with a cue.
  • Thumbnail check at the end of session 1: six different plans, two starred, each with a sentence on what balances the large cut.
  • Studio walk-through in session 2: from across the room, ask each student which edge carries the most weight and what answers it.
  • Dry-fit conference in session 4: the student says which ground was chosen and what the third value did.

The scoring rubric

Each criterion at four levels, from beginning to exceeding.

CriterionBeginningDevelopingMeetingExceeding
Figure and groundCannot yet say which area is the figure.Names the figure in one example but not the cue that decides it.Labels figure and ground in three examples and names a cue for each.Explains how the figure changes with the ground color and uses that change on purpose in the notan.
Asymmetrical balanceCuts on one edge only, or mirrored pairs; the design leans.One large cut and some smaller ones, but the design leans when squinted at.One large cut balanced by at least three smaller cuts on other edges; it holds still at a squint.Holds still, and the student explains what balanced it: number, size, value or distance from the center.
Nested cut and craftNo nested cut; edges torn or pieces lost.A nested cut in one version only, or pieces not mirrored across their edges.A nested cut in both versions; pieces line up with their holes and edges are clean.The nested cut is a deliberate figure-ground reversal, with crisp cutting and flat gluing throughout.
ValueOnly one version made.Two versions made but not compared.Two-value and three-value versions with a sentence on what changed.The paper ground was chosen from the comparison and defended with the words figure and ground.
CritiqueDescribes only.Three of the four steps, or a judgment with no reason.All four steps, with a judgment tied to a named element or principle.All four steps with evidence from the work, and an interpretation linked to an artwork from the unit.

Safety and supervision

Scissors are the default for every cut and any student may choose them, but craft knives are used only after your demonstration and with you supervising the table. Knife users work on a self-healing cutting mat with a metal ruler, the blade moving away from the body and the other hand behind the ruler. Blades are retracted or capped when put down, knives are counted out and back in, and used blades go in a sharps container. Paint on covered tables in washable, nontoxic tempera with the ACMI AP seal, wash hands afterward, and keep screen work to the planned time, with students standing back from the screen to squint.

Standards cited

TEKS §117.202, §117.203 and §117.204 (Art, Middle School 1, 2 and 3). Quoted word for word from the official text.

Standards for Art, Middle School 1

The Art, Middle School 1 standards this unit meets, by strand.

Foundations: observation and perception

Foundations: observation and perception. The student develops and expands visual literacy skills using critical thinking, imagination, and the senses to observe and explore the world by learning about, understanding, and applying the elements of art, principles of design, and expressive qualities. The student uses what the student sees, knows, and has experienced as sources for examining, understanding, and creating original artworks. The student is expected to:

§117.202(c)(1)(A)
identify and illustrate concepts from direct observation, original sources, personal experiences, and communities such as family, school, cultural, local, regional, national, and international; Source
§117.202(c)(1)(C)
understand and apply the principles of design, including emphasis, repetition/pattern, movement/rhythm, contrast/variety, balance, proportion, and unity, in personal artworks using art vocabulary appropriately; and Source
§117.202(c)(1)(D)
discuss the expressive properties of artworks such as appropriation, meaning, narrative, message, and symbol using art vocabulary accurately. Source

Creative expression

Creative expression. The student communicates ideas through original artworks using a variety of media with appropriate skills. The student expresses thoughts and ideas creatively while challenging the imagination, fostering reflective thinking, and developing disciplined effort and progressive problem-solving skills. The student is expected to:

§117.202(c)(2)(B)
apply the art-making process to solve problems and generate design solutions; and Source
§117.202(c)(2)(C)
produce artworks, including drawings, paintings, prints, sculptures/modeled forms, ceramics, fiber art, photographic imagery, and digital art and media, using a variety of materials. Source

Historical and cultural relevance

Historical and cultural relevance. The student demonstrates an understanding of art history and culture by analyzing artistic styles, historical periods, and a variety of cultures. The student develops global awareness and respect for the traditions and contributions of diverse cultures. The student is expected to:

§117.202(c)(3)(A)
identify the influence of historical and political events in artworks; Source

Critical evaluation and response

Critical evaluation and response. The student responds to and analyzes artworks of self and others, contributing to the development of the lifelong skills of making informed judgments and reasoned evaluations. The student is expected to:

§117.202(c)(4)(A)
create written or oral responses to artwork using appropriate art vocabulary; Source
§117.202(c)(4)(B)
analyze original artworks using a method of critique such as describing the artwork, analyzing the way it is organized, interpreting the artist's intention, and evaluating the success of the artwork; Source

Standards for Art, Middle School 2

The Art, Middle School 2 standards this unit meets, by strand.

Foundations: observation and perception

Foundations: observation and perception. The student develops and expands visual literacy skills using critical thinking, imagination, and the senses to observe and explore the world by learning about, understanding, and applying the elements of art, principles of design, and expressive qualities. The student uses what the student sees, knows, and has experienced as sources for examining, understanding, and creating original artworks. The student is expected to:

§117.203(b)(1)(B)
compare and contrast the elements of art, including line, shape, color, texture, form, space, and value, as the fundamentals of art in personal artworks using vocabulary accurately; Source
§117.203(b)(1)(C)
compare and contrast the principles of design, including emphasis, repetition/pattern, movement/rhythm, contrast/variety, balance, proportion, and unity, in personal artworks using vocabulary accurately; and Source

Creative expression

Creative expression. The student communicates ideas through original artworks using a variety of media with appropriate skills. The student expresses thoughts and ideas creatively while challenging the imagination, fostering reflective thinking, and developing disciplined effort and progressive problem-solving skills. The student is expected to:

§117.203(b)(2)(C)
apply technical skills effectively using a variety of materials to produce artworks, including drawings, paintings, prints, sculptures/modeled forms, ceramics, fiber art, photographic imagery, and digital art and media; and Source

Historical and cultural relevance

Historical and cultural relevance. The student demonstrates an understanding of art history and culture by analyzing artistic styles, historical periods, and a variety of cultures. The student develops global awareness and respect for the traditions and contributions of diverse cultures. The student is expected to:

§117.203(b)(3)(A)
analyze ways that global, cultural, historical, and political issues influence artworks; Source

Standards for Art, Middle School 3

The Art, Middle School 3 standards this unit meets, by strand.

Foundations: observation and perception

Foundations: observation and perception. The student develops and expands visual literacy skills using critical thinking, imagination, and the senses to observe and explore the world by learning about, understanding, and applying the elements of art, principles of design, and expressive qualities. The student uses what the student sees, knows, and has experienced as sources for examining, understanding, and creating original artworks. The student is expected to:

§117.204(b)(1)(B)
evaluate the elements of art, including line, shape, color, texture, form, space, and value, as the fundamentals of art in personal artworks using vocabulary accurately; Source
§117.204(b)(1)(C)
evaluate the principles of design, including emphasis, repetition/pattern, movement/rhythm, contrast/variety, balance, proportion, and unity, in personal artworks using vocabulary accurately; and Source